Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discreet, doesn't use key fobs or LED indicators and is concealed in the vehicle's wiring.
It also allows the user to disable the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will take you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against key cloning, hacking and relay attacks. The system is connected directly to the ECU of your car and secured by a PIN code you select. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It is not able to be disabled by cutting circuits.
The system is simple to use, however it's important to have an expert installation to ensure a secure and secure connection with your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's protection package.
The first step is to disconnect your battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer may start working safely. Hand tools are essential to make precise connections and a multimeter can be used to test electrical values and ensure safety. Insulation tape and cable tie are essential to protect connections and keep wiring tidy. In addition, the user's manual provides specific guidance tailored to your Ghost Immobiliser model.
During the installation process, it's important to choose the right grounding location that is free of debris and paint. Installers should also ensure that the immobiliser's wires CAN H & the CAN L are connected to the proper ECU ports. The wires can be connected or soldered based on the model. A high-quality connector is recommended to ensure a sturdy and secure connection.
After the installation is completed Once the installation is completed, the customer can enable the Transport Mode. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times within two seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's an excellent choice for those who rent their vehicles often through platforms like Turo. Immobilisers can lower insurance rates, as it decreases the likelihood of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser for those who want to safeguard your vehicle from theft. It protects your vehicle from being started when a criminal steals or copies the key. It is possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device is connected to the vehicle's bus system CAN and allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the ultimate security system that will safeguard your pride and joy and preserve its value in the event that you decide to sell it in the future.
Installing Ghost's immobiliser is straightforward, but you must follow the directions to avoid electrical issues and malfunctions in the system. First, you need to locate and identify a constant 12V power source as well as an adequate grounding point on the chassis of your vehicle. After that, you can begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a solid connection. Also, ensure that you cover the connections with heat shrink tubing and insulation tape to protect them from electrical short circuits and other problems.
Once the wires are connected, you are able to connect the battery and start the engine to determine whether the immobiliser works. Once everything is working properly you can place it in a safe location under the dash or elsewhere in the vehicle. Make sure to cover it securely so that thieves can't get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is a fantastic deterrent to car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and can't be disabled without knowing the code. The device is also easy to use and is able to be put into a service valet mode so that your car will not be activated when you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your vehicle. In contrast to other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of the factory settings of your vehicle.
The system is also unnoticeable by thieves using scanners for diagnostics. The system does not send or receive radio frequency signals and instead uses CAN data to communication with your ECU. It also doesn't require modifications to your current key fobs.
Enter the sequence to disarm (either two or one button) and turn on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After this, you can start your vehicle and drive off safely.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to hand your car to service or valet parking.
You'll need a constant power source (12V) as well as a grounding source to complete the installation of the Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. It is also recommended to use cable ties to bundle and secure the wires, as this will decrease the chance of being tampered with by thieves. To avoid committing mistakes, make sure to double-check these points and mark them with the use of tape or labels. Check all connections for signs that they're wearing out. Loose connections can lead to malfunctions in the system, so make certain that they are securely fixed and well-insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit is functioning properly, and that all connections are secure and insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your vehicle's ECU to prevent unauthorised engine start. Its innovative technology protects your vehicle from key cloning and hacking and other common tactics that thieves employ to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to offer the ultimate security for your vehicle. This system's unmatched features and subtle design make it a preferred choice for car enthusiasts and security-conscious motorists alike.
It is crucial to follow the steps of installation in order to ensure complete integration of the Ghost Immobiliser. Check the wiring diagram of the vehicle to aid you in locating and connecting the wires. The next step is to identify the power source as well as grounding points. Once you've located them, you'll have to mark them so that they are easily identifiable when installing. It's essential to use high-quality materials and tools. Basic hand tools will assist you in making precise connections. A multimeter can verify electrical values and guarantee security. Insulation tape and cable ties will help keep all connections tidy and neat. Finally, a user manual will provide specific guidance specific to your Ghost model.
It is important to test the system before installing it. Enter the PIN code into the system and then start the vehicle. This step will confirm that the immobiliser is working according to plan, and prevents unauthorised vehicle start-ups. ghost car immobiliser is recommended that you perform this step regularly as part of your routine inspections of your vehicle to ensure that the system is working properly.
After the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will help keep your precious possessions safe from would-be thieves and ensure that nobody is able to drive off with your vehicle without the correct PIN code. The Ghost can also be paired with a Thatcham-approved tracker to identify any attempts to steal or tamper that could lead to the location of your vehicle if it is stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with all major brands. If you are looking to secure your vehicle with this cutting-edge device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines for installing our products. This assures customers, insurance companies and law enforcement officials that all installations are performed in a safe and correct manner.